Delrin® 150 Natural Round Bar - .187" through 10.00" diameter - Full Length
(39)HPV13 is a brown homopolymer acetal with an internal PTFE lubricant. Its low coefficient of friction, excellent PV values, toughness, wear resistance, and machinability make it an exceptional material for use in many industrial and military components with moving parts. Additionally, HPV13 has superior chemical resistance and flexural fatigue properties, as well as low moisture absorption associated with acetal materials,
PTFE-Filled Acetal Shapes
Overview:
PTFE-filled Acetal (also known as PTFE-enhanced POM or PTFE-blended acetal) is a high-performance engineering plastic designed for applications requiring low friction, enhanced wear resistance, and excellent dimensional stability. By incorporating polytetrafluoroethylene (PTFE) into the acetal matrix, this material combines the strength and machinability of acetal with the superior lubricity of PTFE.
Key Features:
-
Low Coefficient of Friction: Excellent for sliding applications, reducing the need for external lubrication.
-
Improved Wear Resistance: Outperforms standard acetal in high-load, high-cycle environments.
-
Dimensional Stability: Maintains tight tolerances and mechanical integrity over time.
-
Chemical Resistance: Good resistance to fuels, solvents, and many chemicals.
-
Machinability: Easy to machine with excellent surface finish.
Typical Applications:
-
Bushings and bearings
-
Gears and wear pads
-
Conveyor components
-
Sliding parts in food processing and packaging
-
Automotive and industrial machinery components
Available Forms:
-
Rods
-
Sheets
-
Tubes
(Custom sizes available upon request)
Delrin® 150 Natural Round Bar - Cut-to-size Lengths 2.500 through 10.00 diameter
(50)HPV13 is a brown homopolymer acetal with an internal PTFE lubricant. Its low coefficient of friction, excellent PV values, toughness, wear resistance, and machinability make it an exceptional material for use in many industrial and military components with moving parts. Additionally, HPV13 has superior chemical resistance and flexural fatigue properties, as well as low moisture absorption associated with acetal materials,
PTFE-Filled Acetal Shapes
Overview:
PTFE-filled Acetal (also known as PTFE-enhanced POM or PTFE-blended acetal) is a high-performance engineering plastic designed for applications requiring low friction, enhanced wear resistance, and excellent dimensional stability. By incorporating polytetrafluoroethylene (PTFE) into the acetal matrix, this material combines the strength and machinability of acetal with the superior lubricity of PTFE.
Key Features:
-
Low Coefficient of Friction: Excellent for sliding applications, reducing the need for external lubrication.
-
Improved Wear Resistance: Outperforms standard acetal in high-load, high-cycle environments.
-
Dimensional Stability: Maintains tight tolerances and mechanical integrity over time.
-
Chemical Resistance: Good resistance to fuels, solvents, and many chemicals.
-
Machinability: Easy to machine with excellent surface finish.
Typical Applications:
-
Bushings and bearings
-
Gears and wear pads
-
Conveyor components
-
Sliding parts in food processing and packaging
-
Automotive and industrial machinery components
Available Forms:
-
Rods
-
Sheets
-
Tubes
(Custom sizes available upon request)
Delrin® 511P POM-H Shapes
(56)DELRIN® 511P is a Homopolymer acetal from Delrin USA LLC that offers enhanced crystallization characteristics. This higher level of crystallization helps to augment aspects of the physical properties such as fatigue strength, stiffness, and creep resistance. Delrin® is a registered trademark of Delrin USA LLC.
Main Features
- good machinability
- high stiffness
- high fatigue strength
- high creep resistance
- good wear properties
- very good abrasion resistance
Target industries
Delrin® 527UV BK701 POM-H Shapes
(56)Delrin® 527UV BK701 is a black homopolymer acetal that has been enhanced with UV stabilizers. It is also available in natural on a custom run basis. Developed by Delrin USA LLC to replace Delrin® 507, this material is particularly suited to automotive and other outdoor applications. It exhibits improvements in UV aging characteristics and thermal stability. Delrin® is a registered trademark of Delrin USA LLC.
Main Features
- very good UV and weather resistance
- improved surface hardness
- good machinability
- very good mechanical strength
Target industries
Delrin® 570 Glass-filled POM-H Shapes
(55)Delrin® 570 extruded shapes are 20% glass filled materials intended for general industrial use. This glass-filled homopolymer acetal material from Delrin USA LLC offers very high stiffness, low warpage, and low creep for superior part performance under stress. The user can also count on good dimensional stability and machinability, however should also note that the fibers offer stiffness but not reinforcement. Delrin® is a registered trademark of Delrin USA LLC.
/Asset/POM1.jpg
Delrin® 100AF Blend 13% PTFE Fiber-reinforced Shapes
(60)Delrin® 100AF Blend is a specialized thermoplastic material engineered for demanding applications where low friction, reduced wear, and extended component life are critical. It belongs to the acetal homopolymer family (polyoxymethylene or POM), produced by DuPont under the Delrin® brand, and is commonly used in moving parts such as bearings, gears, rollers, and bushings.
Key Composition and Formulation
- Base Material: A 2:1 blend of Delrin® AF 100 (20% PTFE-filled) and Delrin® 150 (unfilled) resins.
- Filler Content: Uniformly dispersed PTFE (polytetrafluoroethylene) fibers at approximately 13% by weight, which enhances lubricity without compromising core structural properties.
- Color: Naturally dark brown.
- Forms Available: Extruded rods, sheets, and plates for machining into custom components.
Properties and Performance
- Friction and Wear: Exhibits an exceptionally low coefficient of friction (both static and dynamic), minimizing slip-stick behavior. This allows bearings to operate at higher speeds and loads with significantly reduced wear compared to standard Delrin®.
- Strength Retention: Maintains about 90% of the tensile strength, stiffness, and toughness of unmodified Delrin®, while offering better sliding properties.
- Dimensional Stability: Low moisture absorption, resistance to solvents (including gasoline), lubricants, and chemicals, making it suitable for self-threading screws or interference-fit parts.
- Machinability: Excellent, enabling precise fabrication of complex geometries.
- Trade-offs: Slight reductions in impact strength and wear resistance relative to unfilled Delrin® due to the softer PTFE addition, but overall superior for lubricity-focused uses.
Applications
Ideal for non-lubricated or low-maintenance environments in industries like automotive, aerospace, industrial machinery, and consumer products. Examples include high-speed bearings, conveyor components, and valve seats.
Delrin® 100AF 20% PTFE vs Delrin 100AF Blend 13% PTFE
Delrin® 100AF and Delrin® 100AF Blend are both PTFE (polytetrafluoroethylene)-filled acetal homopolymers from DuPont (now DELRIN USA LLC), designed for low-friction, wear-resistant applications like bearings, bushings, and sliding components. They enhance the base Delrin® acetal's properties with PTFE for reduced friction and improved lubricity. The key differences lie in their composition, PTFE content, processing methods, and resulting mechanical trade-offs.
Key Differences
| Property | Delrin® 100AF | Delrin® 100AF Blend |
|---|---|---|
| PTFE Content | 20% uniformly dispersed PTFE fibers | 13% PTFE fibers (typically a 2:1 blend of Delrin® 100AF and unfilled Delrin® 150) |
| Processing | Injection molding and Extrusion | Primarily for stock shapes via extrusion |
| Color | Dark Brown, Opaque off-white or natural acetal color | Dark brown |
| Strength & Toughness | Higher tensile strength and impact resistance due to full PTFE loading | Retains ~90% of unmodified Delrin® strength; slightly lower impact and wear capability from reduced PTFE |
| Friction & Wear | Lowest coefficient of friction; excellent for high-speed, low-lubricant needs | Very low friction with minimal "stick-slip"; better wear than unfilled Delrin® |
| Cost & Availability | More expensive; available but often custom-order for full-strength 20% fill | More cost-effective and widely available for stock shapes |
| Applications | Extruded shapes, Precision molded parts requiring maximum lubricity (e.g., high-load bearings) | General-purpose extruded parts (e.g., bushings, gears) where balanced properties are needed |
Delrin® 100AF 20% PTFE Fiber-reinforced Shapes
(55)Delrin® 100AF is a high viscosity acetal homopolymer containing 20% PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.
Key Properties of Delrin 100AF 20% PTFE Fiber-filled POM-H
- Composition: Homopolymer acetal resin uniformly reinforced with 20% chopped PTFE fibers for homogeneous distribution, optimizing sliding friction without compromising core acetal toughness.
- Performance Benefits:
- Superior wear resistance and reduced coefficient of friction compared to unfilled acetal or powder-filled PTFE variants.
- Excellent internal lubrication, eliminating the need for added oils or greases.
- High strength, toughness, and dimensional stability under load.
- Good creep resistance and machinability; minimal stick-slip effects.
- Color: Typically brown (due to PTFE fiber integration).
- Typical Applications: Bearings, bushings, cams, gears, rollers, and other precision components in automotive, industrial machinery, and consumer electronics where low noise, low maintenance, and high cycle life are critical.
This material maintains the inherent chemical resistance, low moisture absorption, and thermal stability of standard Delrin (up to 180°F/82°C continuous use), but the PTFE fibers specifically target tribological (friction/wear) improvements.
Available Shapes and Forms
Delrin 100AF 20% PTFE fiber is supplied as semi-finished "stock shapes" for machining into custom parts. Common forms include:
Delrin® 100AF and Delrin® 100AF Blend are both PTFE (polytetrafluoroethylene)-filled acetal homopolymers from DuPont (now DELRIN USA LLC), designed for low-friction, wear-resistant applications like bearings, bushings, and sliding components. They enhance the base Delrin® acetal's properties with PTFE for reduced friction and improved lubricity. The key differences lie in their composition, PTFE content, processing methods, and resulting mechanical trade-offs.
Key Differences
| Property | Delrin® 100AF | Delrin® 100AF Blend |
|---|---|---|
| PTFE Content | 20% uniformly dispersed PTFE fibers | 13% PTFE fibers (typically a 2:1 blend of Delrin® 100AF and unfilled Delrin® 150) |
| Processing | Injection molding and Extrusion | Primarily for stock shapes via extrusion |
| Color | Dark Brown, Opaque off-white or natural acetal color | Dark brown |
| Strength & Toughness | Higher tensile strength and impact resistance due to full PTFE loading | Retains ~90% of unmodified Delrin® strength; slightly lower impact and wear capability from reduced PTFE |
| Friction & Wear | Lowest coefficient of friction; excellent for high-speed, low-lubricant needs | Very low friction with minimal "stick-slip"; better wear than unfilled Delrin® |
| Cost & Availability | More expensive; available but often custom-order for full-strength 20% fill | More cost-effective and widely available for stock shapes |
| Applications | Extruded shapes, Precision molded parts requiring maximum lubricity (e.g., high-load bearings) | General-purpose extruded parts (e.g., bushings, gears) where balanced properties are needed |
/Asset/Delrin4.jpg
Delrin® 500AF Blend 13% PTFE Fiber-reinforced Shapes
(55)Delrin® 500AF Blend is a specialized thermoplastic material engineered for demanding applications where low friction, reduced wear, and extended component life are critical. It belongs to the acetal homopolymer family (polyoxymethylene or POM), produced by DuPont under the Delrin® brand, and is commonly used in moving parts such as bearings, gears, rollers, and bushings.
Key Composition and Formulation
- Base Material: A 2:1 blend of Delrin® 500AF (20% PTFE-filled) and Delrin® 150 (unfilled) resins.
- Filler Content: Uniformly dispersed PTFE (polytetrafluoroethylene) fibers at approximately 13% by weight, which enhances lubricity without compromising core structural properties.
- Color: Naturally dark brown.
- Forms Available: Extruded rods, sheets, and plates for machining into custom components.
Properties and Performance
- Friction and Wear: Exhibits an exceptionally low coefficient of friction (both static and dynamic), minimizing slip-stick behavior. This allows bearings to operate at higher speeds and loads with significantly reduced wear compared to standard Delrin®.
- Strength Retention: Maintains about 90% of the tensile strength, stiffness, and toughness of unmodified Delrin®, while offering better sliding properties.
- Dimensional Stability: Low moisture absorption, resistance to solvents (including gasoline), lubricants, and chemicals, making it suitable for self-threading screws or interference-fit parts.
- Machinability: Excellent, enabling precise fabrication of complex geometries.
- Trade-offs: Slight reductions in impact strength and wear resistance relative to unfilled Delrin® due to the softer PTFE addition, but overall superior for lubricity-focused uses.
Applications
Ideal for non-lubricated or low-maintenance environments in industries like automotive, aerospace, industrial machinery, and consumer products. Examples include high-speed bearings, conveyor components, and valve seats.
Delrin® 100AF 20% PTFE vs Delrin 100AF Blend 13% PTFE
Delrin® 500AF and Delrin® 500AF Blend are both PTFE (polytetrafluoroethylene)-filled acetal homopolymers from DuPont (now DELRIN USA LLC), designed for low-friction, wear-resistant applications like bearings, bushings, and sliding components. They enhance the base Delrin® acetal's properties with PTFE for reduced friction and improved lubricity. The key differences lie in their composition, PTFE content, processing methods, and resulting mechanical trade-offs.
Key Differences
| Property | Delrin® 500AF | Delrin® 500AF Blend |
|---|---|---|
| PTFE Content | 20% uniformly dispersed PTFE fibers | 13% PTFE fibers (typically a 2:1 blend of Delrin® 500AF and unfilled Delrin® 150) |
| Processing | Injection molding and Extrusion | Primarily for stock shapes via extrusion |
| Color | Dark Brown, Opaque off-white or natural acetal color | Dark brown |
| Strength & Toughness | Higher tensile strength and impact resistance due to full PTFE loading | Retains ~90% of unmodified Delrin® strength; slightly lower impact and wear capability from reduced PTFE |
| Friction & Wear | Lowest coefficient of friction; excellent for high-speed, low-lubricant needs | Very low friction with minimal "stick-slip"; better wear than unfilled Delrin® |
| Cost & Availability | More expensive; available but often custom-order for full-strength 20% fill | More cost-effective and widely available for stock shapes |
| Applications | Extruded shapes, Precision molded parts requiring maximum lubricity (e.g., high-load bearings) | General-purpose extruded parts (e.g., bushings, gears) where balanced properties are needed |
Delrin® 500AF 20% PTFE Fiber-reinforced Shapes
(55)Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.
Key Properties of Delrin 500AF 20% PTFE Fiber-filled POM-H
- Composition: Homopolymer acetal resin uniformly reinforced with 20% chopped PTFE fibers for homogeneous distribution, optimizing sliding friction without compromising core acetal toughness.
- Performance Benefits:
- Superior wear resistance and reduced coefficient of friction compared to unfilled acetal or powder-filled PTFE variants.
- Excellent internal lubrication, eliminating the need for added oils or greases.
- High strength, toughness, and dimensional stability under load.
- Good creep resistance and machinability; minimal stick-slip effects.
- Color: Typically brown (due to PTFE fiber integration).
- Typical Applications: Bearings, bushings, cams, gears, rollers, and other precision components in automotive, industrial machinery, and consumer electronics where low noise, low maintenance, and high cycle life are critical.
This material maintains the inherent chemical resistance, low moisture absorption, and thermal stability of standard Delrin (up to 180°F/82°C continuous use), but the PTFE fibers specifically target tribological (friction/wear) improvements.
Available Shapes and Forms
Delrin® 500AF 20% PTFE fiber is supplied as semi-finished "stock shapes" for machining into custom parts. Common forms include:
Delrin® 500AF and Delrin® 500AF Blend are both PTFE (polytetrafluoroethylene)-filled acetal homopolymers from DuPont (now DELRIN USA LLC), designed for low-friction, wear-resistant applications like bearings, bushings, and sliding components. They enhance the base Delrin® acetal's properties with PTFE for reduced friction and improved lubricity. The key differences lie in their composition, PTFE content, processing methods, and resulting mechanical trade-offs.
Key Differences
| Property | Delrin® 500AF | Delrin® 500AF Blend |
|---|---|---|
| PTFE Content | 20% uniformly dispersed PTFE fibers | 13% PTFE fibers (typically a 2:1 blend of Delrin® 500AF and unfilled Delrin® 150) |
| Processing | Injection molding and Extrusion | Primarily for stock shapes via extrusion |
| Color | Dark Brown, Opaque off-white or natural acetal color | Dark brown |
| Strength & Toughness | Higher tensile strength and impact resistance due to full PTFE loading | Retains ~90% of unmodified Delrin® strength; slightly lower impact and wear capability from reduced PTFE |
| Friction & Wear | Lowest coefficient of friction; excellent for high-speed, low-lubricant needs | Very low friction with minimal "stick-slip"; better wear than unfilled Delrin® |
| Cost & Availability | More expensive; available but often custom-order for full-strength 20% fill | More cost-effective and widely available for stock shapes |
| Applications | Extruded shapes, Precision molded parts requiring maximum lubricity (e.g., high-load bearings) | General-purpose extruded parts (e.g., bushings, gears) where balanced properties are needed |
/Asset/Delrin4.jpg
DELRIN® AF DE588 PTFE Fiber-filled Shapes
(55)Delrin® AF DE588 is a specialized grade of acetal homopolymer (POM) resin, manufactured by DELRIN USA LLC. It is filled with 20% polytetrafluoroethylene (PTFE) fibers, which are uniformly dispersed throughout the material to enhance its performance properties. This results in a dark brown-colored (natural) thermoplastic that offers superior wear resistance, a low coefficient of friction, and improved dimensional stability compared to standard Delrin® acetal.
Key Features and Benefits:
- Military Certification: Fully tested and certified for use by the United States Navy under specifications such as NAVSEA 6959311 Rev. B and NAVSEA 803-4384678. It meets ASTM D6778
- Primary Applications: Extensively used in naval and submarine environments for heavy-duty mechanical parts, such as bearings, bushings, gears, and seals, where low friction and high durability are critical.
- Forms Available: Commonly supplied as sheets, rods (e.g., diameters from 1.0 to 6.0 inches, lengths up to 5 ft), and tubes for machining into custom parts.
- NAVSEA 6959311 Rev. B, NAVSEA 803-4384678 Rev. B & C
- Meets General Dynamics Electric Boat Division specification NAVS-4384678 Rev C with DRN C2 and Navsea drawing no: 5959311, Rev C, Note 2. K(3) (J) Sheet 13
- ASTM D4181 Superseded by ASTM D6778
- ASTM D6100 Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)
- ASTM D6778-20 Classification System for Acetal Molding and Extrusion Materials (POM)
- Free from mercury contamination
- No additional additives, plasticizers, or processing aids are added in the manufacturing Process
- REACh (EC-Regulation 1907/2006) compliant
- RoHS (2011/65/EU, 2015/863/EU, 2002/96/EG, 2003/11/EG, 2000/53/EG, & China RoHS-2) compliant
- NSN: 9330011953331 DELRIN-AF-DE-588 Plastic Sheet
- NSN: 9390012222128 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390012231437 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390012646826 DELRIN AF-DE 588 Nonmetallic Rod
- NSN: 9390013162226 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390014651102 DELRIN AF DE 588 Nonmetallic Rod
