Celcon® copolymer acetal resin is a high molecular weight, higher toughness and impact resistant POM primarily used for extrusion and selected injection molding applications.

ABS is an amorphous terpolymer of acrylonitrile, butadiene and styrene. Usual compositions are about half styrene with the balance divided between butadiene and acrylonitrile. Using different combinations of these monomers, wide-ranging different ABS types can be manufactured offering a wide spectrum of different properties by means of branching or copolymerization. ABS is an excellent choice for applications which require high impact resistance, strength and stiffness. ABS is an ideal material for machining structural components and pre-production prototypes. Because of its good balance of properties, toughness-strength-temperature resistance coupled with its ease of processing, ABS has a very wide range of applications.

DELRIN®570 resin manufactured by DuPont are 20% glass filled Homopolymer Acetal (POM) intended for general industrial use. This material offers very high stiffness, low warpage, and low creep for superior part performance under stress.

Delrin® 511P is a Homopolymer Acetal resin manufactured by DuPont that offers enhanced crystallization characteristics. This higher level of crystallization helps to augment aspects of the physical properties such as fatigue strength, stiffness, and creep resistance.

KYNAR® PVDF / Poly-Vinyl-Dene-Fluoride offers excellent corrosion and chemical resistance at both ambient and elevated temperatures (up to 275ºF). PVDF is also inherently UV stable, mechanically tough, abrasion and flame resistant. KYNAR® 740 and KYNAR® 1000HD are highly chemically resistant fluoropolymers used in piping, tubing, vessel fabrication, machined valves and fittings, nozzles and other items for corrosive fluid handling. Their inherent chemical resistance and high purity make them ideal for application in contact with high purity water, acids, chlorine, halogenated solvents and petrochemical mixtures.

LEXAN®500R is a 10% glass reinforced polycarbonate. It offers excellent flame retardancy and is especially designed for applications requiring high rigidity together with high heat.

LEXAN®3412R is a 20% glass reinforced polycarbonate. It offers excellent flame retardancy and is especially designed for applications requiring high rigidity together with high heat.

LEXAN®3413R is a 30% glass reinforced polycarbonate. It offers excellent flame retardancy and is especially designed for applications requiring high rigidity together with high heat.

LEXAN®3414R is a 40% glass reinforced polycarbonate. It offers excellent flame retardancy and is especially designed for applications requiring high rigidity together with high heat.

Typical characteristics of NORYL® include excellent dimensional stability, low mold shrinkage, low water absorption and very low creep behavior at elevated temperatures. These properties combined with an outstanding hydrolytic stability in hot and cold water, make NORYL® an excellent potential candidate for fluid engineering applications.
Another outstanding feature of NORYL® is its retention of tensile and flexural strength, even at elevated temperatures. The gradual reduction in modulus as temperature is increased, is a key advantage of this material. As a result, parts fabricated from NORYL® shapes may be used with predictable performance over a wide temperature range.  Another important advantage of NORYL® is its predictably low creep behavior, even at elevated temperatures.
NORYL® exhibits excellent electrical properties, which remain stable over a wide range of temperature, humidity and frequency variations. This stability, together with a fine-tuned balance of thermal and impact properties, makes NORYL® an excellent potential candidate for demanding electrical and electronic applications, including electrical insulators.
All flame retardant NORYL® resins are designed with non-brominated and non-chlorinated flame retardant systems.

KetaSpire® KT-820 is a low flow grade of unreinforced PEEK (polyetheretherketone) supplied in lubricated pellet form. KetaSpire® PEEK is produced to the highest industry standard and is characterized a distinct combination of properties, which include excellent wear resistance, best in class fatige resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing, and other industrial uses. KetaSpire® KT-820 can be easily processed using typical injection molding and extrusion processes.