Polyvinyl Chloride / PVC or Vinyl is usually an amorphous thermoplastic material with excellent chemical resistance and dielectric properties, good tensile, flexural and mechanical strength, low moisture absorption, exceptional dimensional stability and good flammability characteristics. The maximum service temperature for PVC is 140°F. The physical properties of PVC can be readily altered by the addition of plasticizers, impact modifiers and other ingredients to develop and enhance specific properties. Generally, there are two basic types of PVC available - Rigid PVC and Flexible (plasticized) PVC. Fabricated by hot gas welding, fusion, butt welding, ultrasonic sealing, die cutting, vacuum forming and thermoforming, and standard machining techniques.

PVC Type I, Grade I - is a normal impact, high corrosion resistant polyvinyl chloride. Because of its exceptional corrosion resistance, it is ideally suited for applications where maximum chemical resistance is necessary. Its high strength-to-weight ratio, cost efficiency, ease of fabrication and eco balance make it the material of choice.

  • ASTM D1784, CLASS 12454-B.
  • L94 V0.
  • 0.125" through 2.50" diameter available in full lengths only. 2.500" diameter through 14.00" diameter sold in foot increments.
Unit of Measure

Tolerance

N/A + 0.002 in- 0.00 in

Weight

N/A 2.128 lb/ft

Density (ASTM D792)

N/A 1.42 gm/cc

Hardness, Durometer Shore D

N/A 89

Hardness - Rockwell (ASTM D785)

N/A R115

Water Absorption - 24 hrs, 73°F (ASTM D570)

N/A 0.06 %

Tensile Strength (ASTM D638)

N/A 7500 psi

Tensile Modulus (ASTM D638)

N/A 411000 psi

Flexural Strength

N/A 12800 psi

Flexural Modulus

N/A 481000 psi

Izod Impact Strength (ASTM D256)

N/A 1 ft·lb/in

Vicat Softening Point (ASTM D1525)

N/A 181 ºF

Heat Deflection Temperature, 264 psi

N/A 179 ºF

Flammability Rating (UL 94)

N/A V0

Flame Spread (E84)

N/A 15

Dielectric Strength (ASTM D149)

N/A 544 V/mil

Standard Length

N/A 10 ft4 ft8 ft