PETG is a transparent, thermoplastic sheet used widely in the point of purchase industry. PETG products offer superior impact strength over acrylic and cost effectiveness compared to polycarbonate, and offers deep draws, complex die-cuts, and precise molded-in details without sacrificing structural integrity. It die-cuts and punches easily, and can be bonded or fastened with adhesives, ultrasonic welding, or rivets. In addition, PETG is easily decorated by painting, silk screening, or hot stamping. Easy to fabricate, form, bond, and decorate, PETG sheet products are well suited for a variety of point of purchase and other applications.
- Sheets supplied with protective masking on both sides.
- Other sheet sizes available on request.
Unit of Measure
Sheet Size |
N/A 24 x 48 in |
Thickness |
N/A 0.236 in |
Tolerance |
N/A ± 0.012 in |
Weight |
N/A 1.56 lb/ft² |
Specific Gravity (ASTM D792) |
N/A 1.27 |
Light Transmission - Average, 0.125" Disc |
N/A 86 % |
Hardness - Rockwell (ASTM D785) |
N/A R115 |
Water Absorption, Equilibrium, 24 Hours (ASTM D570) |
N/A 0.2 % |
Tensile Strength |
N/A 7700 psi |
Tensile Modulus |
N/A 320000 psi |
Flexural Strength (248ºF/120ºC) |
N/A 11200 psi |
Flexural Modulus - 0.125" (ASTM D790) |
N/A 310000 psi |
Compressive Strength |
N/A 8000 psi |
Izod Impact Strength - Notched at 0.125" at 73º (ASTM D256) |
N/A 1.7 ft·lb/in |
Coefficient of Linear Thermal Expansion |
N/A 3.3 x 10-5 in/in/ºF |
Heat Deflection Temperature at 264 psi |
N/A 157 ºF |
Heat Deflection Temperature at 66 psi |
N/A 164 ºF |
Glass Transition Temperature |
N/A 178 ºF |
Forming Temperature |
N/A 280 - 320 ºF |
Dielectric Strength (ASTM D149) |
N/A 410 V/m |
Optional Sheet Size |
N/A 12 x 12 12 x 48 48 x 120 60 x 96 72 x 120 72 x 96 |
