PEEK HPV (BEARING GRADE)
Carbon fiber reinforced with graphite and PTFE lubricants, this grade of PEEK offers the lowest coefficient of friction and the best machinability for all PEEK grades. An excellent combination of low friction, low wear, high LPV, low mating part wear and easy machining, make it ideal for aggressive service bearings. It is ideal for low wear, high PV parts that require chemical resistance.
Carbon fiber reinforced with graphite and PTFE lubricants, this grade of PEEK offers the lowest coefficient of friction and the best machinability for all PEEK grades. An excellent combination of low friction, low wear, high LPV, low mating part wear and easy machining, make it ideal for aggressive service bearings. It is ideal for low wear, high PV parts that require chemical resistance.
Unit of Measure
Material |
N/A PEEK w/carbon, graphite & PTFE |
Color |
N/A Black |
Tolerance |
N/A +only in |
Standard Length |
N/A 39.40 ft |
Specific Gravity |
N/A 1.44 |
Tensile Strength |
N/A 11000 psi |
Flexural Modulus (248ºF/120ºC) |
N/A 1100000 psi |
Coefficient of Friction |
N/A .21 µ |
Heat Deflection Temperature at 264 psi |
N/A 383 ºF |
Maximum Operating Temperature |
N/A 482 ºF |
Availability |
N/A stock |
