FDA BLUE Acetal GP POM-C - Round Bar .500" through 8.00" Diameter
(16)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
.250" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
.375" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
.500" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
.750" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
1.00" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
1.250" Plate - FDA BLUE Acetal GP POM-C
(13)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
1.500" Plate - FDA BLUE Acetal GP POM-C
(12)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
2.00" Plate - FDA BLUE Acetal GP POM-C
(11)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
2.500" Plate - FDA BLUE Acetal GP POM-C
(9)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
3.00" Plate - FDA BLUE Acetal GP POM-C
(9)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
4.00" Plate - FDA BLUE Acetal GP POM-C
(7)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
4.500" Plate - FDA BLUE Acetal GP POM-C
(5)Acetal polymers, referred to chemically as POM PolyOxyMethylene, are semi-crystalline engineering thermoplastics made by the polymerization of formaldehyde. They have physical properties that are not available with metals or most other plastics; high mechanical strength and rigidity, low coefficients of friction, low moisture absorption, excellent dimensional stability, fatigue endurance, and resistance to abrasion and creep. These materials are also resistant to a wide range of solvents and have good electrical properties.
Applications
• Structural components
• Bearings, bushings, wear pads
• Gears
• Electrical components
• Jigs and fixtures
• Pump and valve parts
• Medical components
Characteristics
• Low moisture absorption
• Low coefficient of friction
• High strength and stiffness
• Excellent electrical properties
• Good chemical resistance
• Easy to fabricate
Acetal MX-D FDA BLUE Detectable POM-C Shapes
(36)Acetal MX-D metal and x-ray detectable shapes are made from Acetal (polyoxymethylene, POM) infused with detectable additives, such as metal particles or X-ray-visible compounds. These shapes are designed for use in industries like food processing, pharmaceuticals, and packaging, where contamination detection is critical.
Key Characteristics:
- Detectability: Embedded additives allow detection by metal detectors and X-ray systems, ensuring any fragments or parts contaminating products can be identified and removed.
- Material Properties: Acetal provides high strength, stiffness, and low friction, with excellent dimensional stability and resistance to wear, chemicals, and moisture.
- Applications: Used for conveyor components, gears, rollers, bearings, and other parts in environments requiring hygiene and safety compliance (e.g., FDA, USDA, or EU food-contact regulations).
- Color: Typically available in distinct colors like blue to aid visual identification, though color may vary based on manufacturer.
- Machinability: Easily machined into precise shapes while maintaining tight tolerances.
- Temperature Resistance: Operates effectively in a range of -40°C to 80°C (-40°F to 176°F), though specific limits depend on the formulation.
- Durability: Resistant to abrasion and impact, ensuring long service life in demanding applications.
These shapes combine acetal’s robust mechanical properties with enhanced safety features, making them ideal for critical applications where contamination risks must be minimized.
/Asset/AcetalGP Blue4.jpg