• Delrin4

Delrin® 100AF is a high viscosity acetal homopolymer containing 20% PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.

Key Properties of Delrin 100AF 20% PTFE Fiber-filled POM-H

  • Composition: Homopolymer acetal resin uniformly reinforced with 20% chopped PTFE fibers for homogeneous distribution, optimizing sliding friction without compromising core acetal toughness.
  • Performance Benefits:
    • Superior wear resistance and reduced coefficient of friction compared to unfilled acetal or powder-filled PTFE variants.
    • Excellent internal lubrication, eliminating the need for added oils or greases.
    • High strength, toughness, and dimensional stability under load.
    • Good creep resistance and machinability; minimal stick-slip effects.
    • Color: Typically brown (due to PTFE fiber integration).
  • Typical Applications: Bearings, bushings, cams, gears, rollers, and other precision components in automotive, industrial machinery, and consumer electronics where low noise, low maintenance, and high cycle life are critical.

This material maintains the inherent chemical resistance, low moisture absorption, and thermal stability of standard Delrin (up to 180°F/82°C continuous use), but the PTFE fibers specifically target tribological (friction/wear) improvements.

Available Shapes and Forms

Delrin 100AF 20% PTFE fiber is supplied as semi-finished "stock shapes" for machining into custom parts. Common forms include:

Delrin® 100AF and Delrin® 100AF Blend are both PTFE (polytetrafluoroethylene)-filled acetal homopolymers from DuPont (now DELRIN USA LLC), designed for low-friction, wear-resistant applications like bearings, bushings, and sliding components. They enhance the base Delrin® acetal's properties with PTFE for reduced friction and improved lubricity. The key differences lie in their composition, PTFE content, processing methods, and resulting mechanical trade-offs.

Key Differences

Property Delrin® 100AF Delrin® 100AF Blend
PTFE Content 20% uniformly dispersed PTFE fibers 13% PTFE fibers (typically a 2:1 blend of Delrin® 100AF and unfilled Delrin® 150)
Processing Injection molding and Extrusion Primarily for stock shapes via extrusion
Color Dark Brown, Opaque off-white or natural acetal color Dark brown
Strength & Toughness Higher tensile strength and impact resistance due to full PTFE loading Retains ~90% of unmodified Delrin® strength; slightly lower impact and wear capability from reduced PTFE
Friction & Wear Lowest coefficient of friction; excellent for high-speed, low-lubricant needs Very low friction with minimal "stick-slip"; better wear than unfilled Delrin®
Cost & Availability More expensive; available but often custom-order for full-strength 20% fill More cost-effective and widely available for stock shapes
Applications Extruded shapes, Precision molded parts requiring maximum lubricity (e.g., high-load bearings) General-purpose extruded parts (e.g., bushings, gears) where balanced properties are needed

 

 

 

1 - 25 of 55 | Results Per Page | View | Unit of Measure
1 2 3 
Request Information Compare Items

Item #

Material

Color

Shape

Thickness

Sheet Size

Diameter

Standard Length

Availability

Quantity
N/A POM-H N/A Dark Brown N/A Plate N/A 0.25 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 0.375 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 0.500 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 0.625 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 0.750 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 0.875 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 1.000 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 1.250 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 1.500 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 1.750 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 2.000 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 2.250 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 2.500 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 2.750 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 3.000 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 3.500 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Plate N/A 4.000 in N/A 24x48 in N/A -- in N/A -- ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.250 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.312 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.375 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.437 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.500 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.562 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.625 in N/A 10' ft N/A call
N/A POM-H N/A Dark Brown N/A Rod N/A -- in N/A -- in N/A 0.750 in N/A 10' ft N/A call
1 - 25 of 55 | Results Per Page | View | Unit of Measure
1 2 3